<div dir="ltr"><div>If you are interested in the loom contact Mog on <a href="mailto:mog@mogajon.com.au" target="_blank">mog@mogajon.com.au</a> or 0401 968 899. She can help with transporting it south, if needed.<br></div><div><br></div><div>There is a FREE loom available in Narooma - it is a 4 shaft table loom, around 60cm weaving width (forgot my tape-measure). It is very sturdily built from cast metal. I do not recognise it as a particular brand, but if it is home-made, it is well made. </div><div><br></div><div>It was in an awkward position in storage so I haven’t taken photos, and I couldn’t manage to do a complete appraisal, but from what I can see the looms looks structurally sound; the lever mechanisms for the shafts work well; and there is a very old warp on the loom with some weaving so it has definitely worked at some stage.</div><div><br></div><div>Some parts are rusty and I am not sure whether they are salvageable or not. But replacement parts for these are easily available to buy or they can be borrowed from the Bega Valley Textile Group.</div><div><br></div><div>This looks like a good solid loom which needs a bit of TLC to get it up and running again. But once you have done that, it looks as though it would be a very useful loom.</div><div><br></div><div>If you think you might be interested  in learning to weave, this loom would probably be a cheap way to get started. The Bega Valley Textile Group holds weaving classes every now and then, or you can come to the group and get help there.</div><div><br></div><div>If you are interested in the loom contact Mog on <a href="mailto:mog@mogajon.com.au" target="_blank">mog@mogajon.com.au</a> or 0401 968 899. I can help with transporting it south, if needed.</div><div class="gmail-yj6qo"></div><div class="gmail-adL"><br></div><div class="gmail-adL">===========</div></div>